4. Product
installation
4.1 General installation considerations
This section provides instructions for installing the
RDX
8000.
4.1.1 Selecting a location
Select
a location that meets the following
criteria:
orientation
Horizontal only-either sitting on a table top or mounted in a 19”
equip
ment rack via the included rack mount ears. The
RDX
8000
weighs 15.7 lbs (7.1 kg) when fully populated with cartridges and
must be placed
on
or mounted in a system capable of supporting
Standard
EIA
rack 2U space
Room
temperature
Operating
Non-operating
+10° – +40°
C,
gradient
10°C/hour
- 30° – +60°
C,
gradient
20°C/hour
100-240
VAC
input voltage
50-60 Hz line frequency
1.2-0.6 A
Locate the
RDX
8000 within 6 ft. of an
AC
outlet.
The
AC
power cord is the
RDX
8000 main
AC
disconnect device and
must
be easily
accessible
at all
times.
Place
the
RDX
8000 in an area with minimal sources of
particulate
generation.
Excessive
dust and debris can damage the system.
Avoid locating the unit in areas near frequently used doors and
walk
- ways,
smoke-filled rooms, or areas where it may easily be
Operating
Non-operating
20 – 80 % non-condensing
20 – 90 % non-condensing
For further
information,
see
section “1.1
Physical
specification” on page 75.
Commentaires sur ces manuels