Quantum QP960H Manuel d'utilisateur télécharger pdf (Page 37)

Quantum 960H DVR range manual V1.1

Video Type

Video Type can be set in this menu without rebooting or initialisation. The default is PAL,

NTSC can also be selected

IR Remote Address

The remote control can be used to control up to 16 DVRs, the ID number on each can be set

to a unique address so that the remote will only control one at a time if they are in close

proximity. The default is 11.

Repeated click on the ID value to change to the required number.

To select a unit on the remote control press the ID button, followed by the number, followed

by the ID button again. The LED will flash slowly.

VGA resolution

The VGA resolution can be set from 1024x768 to 1920x1080.

Initialization

All the menu settings will be returned to the factory default. To carry out this function the

system recording will have to be turned off.

Information

The Information Screen shows the hard disk size, current firmware revisions, IP address and

MAC address

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 97 98

Pas de commentaire

Quantum QP960H Manuel d'utilisateur Page 37