Quantum DAT 40 Drive Guide de l'utilisateur télécharger pdf (Page 18)

Scorpion 40 configurations for Windows NT, Novell, and UNIX 15

•

Set the “Maximum delay for the Read/Write command” to

900

6. Press the

RETURN

key. The drive will be installed in the system

database and the appropriate devices created

7. Exit SMIT

Controlling data compression under AIX

After you run SMIT, device files will have been created for your new

tape drive. Typical filenames are listed below:

/dev/rmt0 /dev/rmt0.1 /dev/rmt0.2 /dev/rmt0.3

/dev/rmt0.4 /dev/rmt0.5 /dev/rmt0.6 /dev/rmt0.7

If you enter the configuration information specified in step 5 of the

configuration process, devices rmt0, rmt0.1, rmt0.2 and rmt0.3 will

cause the drive to write in compressed mode. Using devices rmt0.4,

rmt0.5, rmt0.6 and rmt0.7 will cause the drive to write with

compression disabled.

1 2 ... 13 14 15 16 17 18 19

Pas de commentaire

Quantum DAT 40 Drive Guide de l'utilisateur Page 18