Quantum PX502 Guide de l'utilisateur télécharger pdf (Page 83)

Chapter 2 Basic Library Operations

Using the OCP

Quantum PX500 Series User’s Guide 60

Turning Off the Library 2

To turn off the library:

1 Push the power button located on the front of the library and hold for

approximately 1 second (see

figure 35).

The library begins the shutdown sequence. The shutdown sequence

can take up to two minutes to complete.

Placing the Library On-

line or Off-line 2

With the library turned on, press the button corresponding to Ops on the

OCP to access the

Operations screen. Select Library Operations and then

Library on/offline to turn the library off-line. Select Yes or No to confirm

the library state change. For more information on the

Operations screen,

see

“Library Operations” on page 68.

Using the OCP

The operator control panel (OCP) is located on the front of the library.

The menus on the OCP allow you to obtain information about the library,

execute library commands, and test library functions. Before using the

OCP to perform library functions, familiarize yourself with the:

• Home Screen

• OCP Buttons

Home Screen 2

The first screen the OCP displays after library initialization is the main

screen. This screen displays library status and provides information on

the number of tape drives, slots, and serial number (see

figure 2).

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 293 294

Pas de commentaire

Quantum PX502 Guide de l'utilisateur Page 83