Quantum DAT 432/864 Loader Guide de l'utilisateur télécharger pdf (Page 52)

Configuration for Novell and UNIX Operating System Configuration

7. Exit SMIT.

Controlling Data Compression under AIX

After you run SMIT, device files will have been created for your new tape drive. Typical filenames

are listed below:

/dev/rmt0/dev/rmt0.1/dev/rmt0.2/dev/rmt0.3

/dev/rmt0.4/dev/rmt0.5/dev/rmt0.6/dev/rmt0.7

If you enter the configuration information specified in step 5 of the configuration process, devices

rmt0, rmt0.1, rmt0.2 and rmt0.3 will cause the drive to write in compressed mode. Using devices

rmt0.4, rmt0.5, rmt0.6 and rmt0.7 will cause the drive to write with compression disabled.

Configuration for SCO UNIX

Before using the DAT 72 and DDS-4 autoloader in an SCO UNIX environment, set the operating-

system configuration DIP switches as shown below:

Configuration for LINUX

Before using the DAT 72 and DDS-4 autoloader in a LINUX environment, make sure the operating

system configuration DIP switches (switches 5 through 8) are all set to ON.

S5 S6 S7 S8 S10

SCO ON ON ON OFF OFF

UnixWare 7.x ON ON ON ON OFF

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59

Pas de commentaire

Quantum DAT 432/864 Loader Guide de l'utilisateur Page 52