Quantum DLT 2500 Manuel télécharger pdf (Page 6)

Installing a DLTtape or Super DLTtape Drive into an AIX System

6 September 2004 6464181-01 Rev B

4. Reconnect the system AC power cable.

5. Power on and restart the AIX system.

Restarting the system adds the tape drive you are installing to its customized configuration

table as a Defined tape drive. To verify that the tape drive has successfully connected to

your operating system, follow these steps:

1. At the command line, type smit and press Enter.

2. Select Devices.

3. Select Tape Drives.

4. Select List All Supported Tape Drives.

5. The Output window displays a list of tape drives similar to the following table:

6. Select Done to return to the previous Tape Drive menu.

type subclass description

1200mb-c SCSI 1200 MB 1/4-inch Tape Drive

150mb SCSI 150 MB 1/4-inch Tape Drive

525mb SCSI 525 MB 1/4-inch Tape Drive

8mm SCSI 2.3 GB 8mm Tape Drive

8mm5tgb SCSI 5.0 GB 8mm Tape Drive

9trk SCSI 1/2-inch 9-trk Tape Drive

ost SCSI Other SCSI Tape Drive

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Quantum DLT 2500 Manuel Page 6