Quantum SuperLoader 3 Manuel d'utilisateur télécharger pdf (Page 15)

Tape Removal - Removing Top Cover 15

Quantum SuperLoader 3

8 Move the two swing arms located on the gear shaft to the “up” position (see

Figure 17).

Figure 17 Moving Swing Arms

to the “Up” Position

Swing arms

Home position

9 Rotate the turntable manually to Home position as shown above in Figure 17.

Note: If any magazine(s) still need to be removed, carefully rotate the turntable to

disengage the magazine drive gear. Rotate the turntable to orientation

shown in Figure 17 above. The screws on turntable top should be aligned

as shown. Use a plastic card to release the magazine latch and carefully

slide magazine out.

1 2 ... 10 11 12 13 14 15 16 17 18

Pas de commentaire

Quantum SuperLoader 3 Manuel d'utilisateur Page 15