Quantum ATL StackLink Spécifications télécharger pdf (Page 19)

Quantum|ATL StackLink™ Installation Instructions

Document 6421009-04, Ver. 4, Rel. 0

February 2002

Cabling the Library 19

Figure 15 Library Control

and StackLink Power

Cabling

3 Connect the bottom M1500 module in the rack to the I

terminator board:

• On a 2-high stack, use library control bus cable PN AS3642.

• On a 5-high or 10-high stack, use library control bus cable

PN AS3643.

StackLink Motor

Connection

Once you have completed the interlibrary cabling, connect the

StackLink motor cable (PN 214090/01, 214080/01, or 214070/01) from

the StackLink motor to the StackLink motor drive on any of the library

modules (see figure 16

Note: The library module that is connected to the StackLink motor

becomes the GUI master.

Library control bus terminator

Library control

bus (daisy

chained)

This cable

completes a loop

back to the I

terminator board

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

Quantum ATL StackLink Spécifications Page 19