Quantum Tape Drive DLT VS80 Manuel d'utilisateur télécharger pdf (Page 27)

DLT VS80 Tape Drive Installation and Operations Guide

001596-01 Rev A07 May 2004 3-13

NOTE: If the SCSI cable that came with the SCSI host bus adapter already has a

terminator built into it, do not use another terminator. An example of such

a cable is shown in Figure 3-8.

3.3.3 Installing Your Internal Tape Drive

In the final installation stages, you install your tape drive in the server or workstation and connect the

SCSI and power cables.

To install your internal tape drive, follow these steps:

1. Shut down the operating system and power off the selected server or workstation.

2. Power off all peripheral devices such as printers and other SCSI devices.

Figure 3-8. SCSI Cable with Built-in Terminator

AUTION Do not go to step 3 until you have completed steps 1 and 2.

Failure to follow these instructions may result in damage to

the tape drive or other devices.

Terminator

SCSI cable

(supplied with

host bus adapter)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 49 50

Pas de commentaire

Quantum Tape Drive DLT VS80 Manuel d'utilisateur Page 27