Quantum Pathlight VX Guide de l'utilisateur télécharger pdf (Page 49)

Pathlight VX Site Preparation Guide 45

Planning to Configure Physical Libraries and

Remotely Manage the Pathlight VX

This section specifies information needed to configure one or more physical (tape) libraries attached to the

Pathlight VX, determine when an aggregation device is required, and remotely manage the Pathlight VX.

This information must be gathered before the Pathlight VX is installed. The Systems Engineer (SE) and the

Key Account Program Manager (KAPM) should gather the specified information and assign tasks to

installers. For more comprehensive information about attaching and configuring physical libraries, refer to

"Configuring a Physical Library for Pathlight VX" in the Pathlight VX Installation Guide.

Planning for Physical Library Configuration and Pathlight VX

Remote Management

Table 32 lists the tasks that must be completed to configure physical libraries and remotely manage the

Pathlight VX.

Table 32 Planning to Configure Physical Libraries and Remotely Manage the Pathlight VX

Task Description Page

1 If an aggregation device will be used with Pathlight VX, record information for

Pathlight VX Connectivity to an External Aggregation Device

2 Record information for P

athlight VX Connectivity to Physical Libraries.50

3 Record information for Pathlight VX and Physical Library Remote

Management.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Pas de commentaire

Quantum Pathlight VX Guide de l'utilisateur Page 49