Quantum DAT72 Guide de l'utilisateur télécharger pdf (Page 72)

Chapter 6 Troubleshooting

Mounting Hardware Problems

DDS-4/DAT 72 User’s Guide 60

Mounting Hardware Problems 6

The internal DDS-4 and DAT 72 drives are designed to install in most

servers using the hardware accompanying the drives, without requiring

additional items. However, if your server requires additional items to

install the internal DDS-4 or DAT 72 drives, or if any original server

components are damaged or lost, contact your server manufacturer or

vendor.

Drive Does Not Work 6

If the green Power-On LED on the external tape drive does not go ON, or

if the internal tape drive does not work:

1 Check the power connection to the drive.

2 If the connection is secure, replace the power cable with one that is

known to work.

3 If the drive still does not work, contact the Technical Support

department.

Power-On Self-Test Fails 6

If the drive fails its Power-On Self-Test:

1 Check for a cartridge in the drive. If you find one, eject it.

2 Power-down the drive and power it up again.

3 If the drive still fails its Power-On Self-Test, contact the Technical

Support department.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 80 81

Pas de commentaire

Quantum DAT72 Guide de l'utilisateur Page 72