
Pathlight VX User’s Guide 33
• Setting the Time - The time can be set manually or synchronized with NTP.
• To manually set the time:
a. In the Enter Time field, enter the local time and specify AM or PM.
b. Go to Step 4
.
• To synchronize the time with NTP:
a. In the NTP field, select Enable.
b. In the Enter IP Address 1 field, enter the IP address of the NTP server with which to
synchronize the Pathlight VX. Click Test to verify that the Pathlight VX can access the
specified server.
c. Optionally, in the Enter IP Address 2 field, enter the IP address of a second NTP server
with which to synchronize the Pathlight VX. The system only accesses the second NTP
server if, for some reason, the first NTP server cannot be reached. Click Test to verify that
the Pathlight VX can access the specified server.
d. Go to Step 4
.
• Setting the Time Zone - The time zone must be set manually.
a. In the Enter Time Zone field, specify the time zone where the Pathlight VX is located.
b. Go to Step 4
.
4 Click Apply.
The Progress Window appears, which contains information on the status of the updated settings.
• If Success appears in the Progress Window: The updated settings were successfully changed.
• If Failure appears in the Progress Window: The updated settings were NOT changed. To view the
troubleshooting procedures, click View Recommended Actions. To view the error details, click
Error Log for information on why the updated settings were not changed. To change the date, time
and/or time zone settings, repeat Step 3
on page 32 and Step 4.
5 Click Close to close the Progress Window.
Note
Once the Progress Window appears, you cannot cancel or stop this
action. However, you can close the window by clicking on the X in the
upper-right of the screen, but confirmation of success or failure is NOT
shown.
Commentaires sur ces manuels