Quantum DLT 8000 Guide de l'utilisateur télécharger pdf (Page 30)

Quantum DLT Drives & Media

Troubleshooting DLT Drives

Chapter 22-14

1. Place the DLT drive module on its top side so that the bottom of the

drive module is facing up.

2. Insert a Phillips #2 screwdriver in the rewind hole on the bottom of

the drive module and engage the screw.

NOTE Gently move the ribbon cable to one side of the rewind hole if necessary.

3. Turn the screwdriver counter-clockwise to rewind the tape. Continue

rewinding until the leader is seated in the tape cartridge.

CAUTION Do not use a power screwdriver as damage may result to the tape.

Figure 2-5 Rewinding a Tape in the DLT Drive Module

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 68 69

Pas de commentaire

Quantum DLT 8000 Guide de l'utilisateur Page 30