Quantum DLT 8000 Guide de l'utilisateur télécharger pdf (Page 31)

Quantum DLT Drives & Media

Troubleshooting DLT Drives

Chapter 2 2-15

Removing a Stuck Tape

Use the following procedure and Figure 2-6 to remove a tape stuck in a

DLT drive module:

1. Locate the spring-loaded latch near the opening on the drive module,

and push it outward (item 1 in Figure 2-6). Ensure that you move

both parts of the latch.

2. While holding the latch outward, rotate the thumb-wheel (drive gear)

until the tape ejects (item 2 in Figure 2-6).

NOTE If turning the thumb-wheel does not eject the tape, or if you encounter

high resistance in turning the thumb-wheel, check to ensure that the

spring-loaded latch has been rotated outward.

3. Verify the tape is not damaged (see “Inspecting DLT Cartridges” on

page 2-6).

Figure 2-6 Spring-Loaded Latch and Thumb-Wheel

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 68 69

Pas de commentaire

Quantum DLT 8000 Guide de l'utilisateur Page 31