Quantum DLT VS160 Manuel d'utilisateur télécharger pdf (Page 46)

Operating the ValueLoader

Using Cartridges

32 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

Unloading

Cartridges

This option unloads the cartridge from the tape drive into its

original slot. To use this option, follow these steps:

1 From the Home Screen or main menu, press the [+] or [–]

button until “Commands” appears on the top line of the LCD

screen. Press

[Enter].

2 Press the [+] or [–] button until “Unload Cartridge” appears on

the LCD screen. Press the

[Enter] button to unload the cartridge

from the tape drive.

3 Status messages appear while the cartridge is unloading.

“Drive Empty” appears when the operation is complete.

4 Press the [Cancel] button when you are done unloading the

cartridge.

Write-Protecting

Cartridges

All cartridges have a write-protect switch to prevent accidental

erasure or overwriting of data. Before loading a cartridge into the

ValueLoader, make sure the write-protect switch on the front of

the cartridge is positioned as desired:

• Slide the switch to the

left to write-protect the cartridge. A

small orange rectangle is visible, indicating the cartridge is

write-protected.

• Slide the switch to the

right to allow the ValueLoader to write

data to the cartridge. The lock icon on the switch indicates that

the cartridge is write-enabled.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 89 90

Pas de commentaire

Quantum DLT VS160 Manuel d'utilisateur Page 46