Quantum ACL 452 Guide d'installation télécharger pdf (Page 28)

Chapter 2 Unpacking the Library

Removing Internal Packing and Inserting Tape Cartridges

12 ACL 4/52 Facilities Planning and Installation Guide

Figure 10 Removing the

Left Panel

Removing the Tie-

Wraps

To remove the tie-wraps:

Note:

Do not cut the tie-wraps; they must be reused when packaging the

library for reshipment.

1 Use an antistatic wrist strap and take any other available antistatic

precautions.

2 Using figure 11, locate tie-wraps securing the horizontal carriage,

the vertical carriage, and extension axis.

3 To remove each tie-wrap, push on the release tab near the tie-wrap

buckle and then slide the end of the tie wrap out of the buckle.

Repeat this step until you have removed all three tie-wraps.

4 Save all tie-wraps for future use.

TA00137a

Left Panel

Retention Tabs

Left Panel

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Pas de commentaire

Quantum ACL 452 Guide d'installation Page 28