Quantum SuperLoader 3 Guide de l'utilisateur télécharger pdf (Page 26)

Chapter 2 Media Changer Commands

Initialize Element Status Command (07h)

Quantum SuperLoader 3 Software Interface Guide 10

Initialize Element Status Command (07h)

The INITIALIZE ELEMENT STATUS command allows the media changer to

check all assigned element addresses for volume and any other status

relevant to that element address. The intent of this command is to enable

the Initiator to get a quick response from a subsequent

READ ELEMENT

STATUS

command. It may be useful to issue this command after a power

failure, if a volume has been changed by an operator, or if configurations

have been changed.

Figure 1 Initialize Element

Status Command

Bit

Byte765 4 3210

Operation Code (07h)

Logical Unit Number Reserved

2-4

Reserved

Unused Reserved Flag Link

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 159 160

Pas de commentaire

Quantum SuperLoader 3 Guide de l'utilisateur Page 26