Quantum DLT 4000 Manuel télécharger pdf (Page 131)

100

101

SCSI Commands

Quantum DLT 4000 Tape Drive 5-31

LOCATE Command (2Bh) (continued)

Table 5–15 LOCATE Command Descriptor Block - Field Descriptions

Field Name Description

BT Block Type. The Block Type bit indicates how the Block Address field is

interpreted. The first recorded object (block or filemark) is at address 0, and

Block Addresses count both data blocks and filemarks.

CP Change Partition. Since multiple partitions are not supported, this bit must be set

to 0.

Immed Immediate. If this bit is set to 1, status is returned as soon as the operation is

started. If set to 0, status is returned after the operation has completed.

Block Address The Block Address field defines the SCSI Logical Block Address to which the

media will be positioned. These addresses start at address 0 and include data

blocks and filemarks. They could also be considered an object address.

Partition Not applicable (see Change Partition field above).

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 299 300

Commentaires sur ces manuels

Pas de commentaire

Quantum DLT 4000 Manuel Page 131

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de bandes magnétiques Quantum DLT 4000