Quantum Scalar i80 Guide de l'utilisateur télécharger pdf (Page 244)

Chapter 8: Getting Information About the Library

Viewing the All Slots Report

216 Quantum Scalar i40 and Scalar i80 User’s Guide

The report contains the following information about each slot:

• Slot Type — I/E station, storage, cleaning, or tape drive slot.

• Barcode — Barcode number of the cartridge installed in the slot. No

barcode number means the slot is empty. “No_Label” means the

barcode is unreadable.

• Partition — Partition that owns the slot (I/E station slots are shared

by all partitions).

• Location — Location coordinates of the slot.

• Element Address — Element address of the slot.

• Encryption — The encryption state of the media in the slot. In order

for the library to know the encryption state, the tape must have

been placed into an encryption-capable tape drive in the library. The

encryption-capable tape drive reads and records the encryption

state of the tape, and the encryption state displays as “Encrypted”

or “Not Encrypted.” If the tape was not placed into an encryption-

capable tape drive in the library, or if the slot is empty, the

encryption state displays as “Unknown.”

• Get Count — The number of times the picker successfully removed

a tape from the slot.

• Get Retries — The number of times the picker had to perform a

recovery operation to remove a tape from the slot.

• Put Count — The number of times the picker successfully placed a

tape into the slot.

• Put Retries — The number of times the picker had to perform a

recovery operation to place a tape into the slot.

Web Client

Select Reports > All Slots.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 403 404

Pas de commentaire

Quantum Scalar i80 Guide de l'utilisateur Page 244