Quantum Scalar 50 LTO-3HH Guide de l'utilisateur télécharger pdf (Page 80)

Chapter 2 Basic Library Operations

OCP Components

Quantum Scalar 50 User’s Guide 56

The Network screen allows you to view or edit the following network

settings:

•DHCP (default setting)

•IP address

•Subnet mask

• Default gateway

•Ethernet 0

2 Use the up and down arrows to select the network setting you wish

to view or edit and press

Enter.

a To enable/disable DHCP, press Yes to enable DHCP or No to

disable DHCP. If your library is not connected to a network

which uses a DHCP server to assign IP information, disable this

function.

b To set the IP address, subnet mask, and gateway, use the up and

down arrows to select the appropriate number and press

Enter to

accept.

3 When you are finished viewing/editing the network information,

press

Exit to return to the Setup screen.

Date and Time 2

To view or edit the date and time information:

1 From the Setup screen, use the up and down arrows to highlight Date

and Time

and press Enter.

The Date and Time screen displays (see figure 40):

Note: The network settings (IP address, subnet mask, and

default gateway) are only active when DHCP is disabled.

Note: For the network information such as the IP address to be

active, the library must reboot. To reboot the library, see

“Reboot Library”

on page 126.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 289 290

Pas de commentaire

Quantum Scalar 50 LTO-3HH Guide de l'utilisateur Page 80