Quantum Scalar 24 Guide de l'utilisateur télécharger pdf (Page 113)

Scalar 24 Installation and Operation Guide 105

Sequential

Sequential allows you to start, stop, and resume the sequential backup sequence. You can also set

sequential loop mode. If your library is partitioned, you can control each partition independently.

Path:

Start Loop

Start Loop mode allows you to operate in a continuous backup mode. When all tape cartridges have been

filled with data, the Scalar 24 begins again with the first cartridge, overwriting tape cartridges upon reuse.

4 The bulk load operation begins. The

operation can be cancelled at any time by

pressing .

Bulk unload for Partition 1 - The library begins

loading the left magazine by selecting the

leftmost available cartridge in the rear slots of

Partition 1 and placing it in the leftmost slot in

the left magazine. The bulk unload continues

until either there are no more tapes in the rear

slots or there are no more available slots in the

magazine.

Note, rear slots identified as Partition 1 can

only be bulk unloaded into Magazine 1, and

rear slots identified as Partition 2 can only be

bulk unloaded into Magazine 2 while

partitioning is enabled.

5 When the bulk load is complete, a

completion screen is displayed. Press

to dismiss the screen.

Selection Description/Result

1 From the Command menu, highlight

and press .

Ensure there are no tape cartridges in the

drive.

Choose Seq. Mode to set options for

sequential backup.

Selection Description/Result

Main Menu

Command Menu

Sequential

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 159 160

Pas de commentaire

Quantum Scalar 24 Guide de l'utilisateur Page 113