Quantum Scalar 24 Guide de l'utilisateur télécharger pdf (Page 74)

66 Using the Menus

20 If Drive 1 is not a SCSI drive, refer to Step

21.

If Drive 1 is a SCSI drive, press and

to set the ID for Drive 1.

For a SCSI drive, you must choose a number

between 0 and 15.

Default: 1

21 If Drive 1 is not a SCSI drive, press to

go to the fibre settings screen for Drive 1.

If Drive 1 is a SCSI drive, press and

then to accept the SCSI ID displayed

for Drive 1 and move to the next option.

22 If Drive 2 is not a SCSI drive, refer to Step

23.

If Drive 2 is a SCSI drive, press and

to set the SCSI ID for Drive 2.

For a SCSI drive, you must choose a number

between 0 and 15.

Default: 2

23 If Drive 2 is not a SCSI drive, press to

go to the fibre settings screen for Drive 2.

If Drive 2 is a SCSI drive, press and

then to accept the SCSI ID displayed

for Drive 2 and move to the next option.

24 If Drive 1 is a fibre drive, press and

to set the ID for Drive 1.

If Drive 1 is not a fibre drive, refer to Step

25.

For a fibre drive, you must choose a number

between 0-126.

Default: 1

25 If you made changes, press and then

to accept them and move to the next

option. If you did not make changes, press

to go to the next option.

Selection Description/Result

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 159 160

Pas de commentaire

Quantum Scalar 24 Guide de l'utilisateur Page 74