Quantum Scalar i500 Guide de l'utilisateur télécharger pdf (Page 346)

100

101

Chapter 12 Installing, Removing, and Replacing

Installing a New Multi-Module Library Configuration

Scalar i500 User’s Guide 327

Preparing to Install a

Multi-Module Library 12

Required tools:

• Phillips #2 screwdriver, for removing and replacing the top cover

plate

• T10 TORX screwdriver, for removing and replacing the bottom cover

plate

1 Prepare the rack to hold modules, if you want to install your library

in a rack. See Installing the Library in a Rack

on page 417 for

instructions on installing a rackmount kit.

2 Make sure all tape drives have been removed from all of the modules

you plan to install. See Adding, Removing, and Replacing Tape

Drives on page 438 for instructions on removing tape drives.

3 Make sure all power supplies have been removed from all of the

modules you plan to install. See Adding, Removing, and Replacing

Power Supplies on page 414 for instructions on removing power

supplies.

4 Park the robot assembly in the control module. Before unstacking the

library, the robot assembly must be placed in the control module.

a Open the I/E station and access doors of each module.

b Using your hands, gently lift the robot assembly into the control

module. The robot assembly should glide slowly and with some

resistance.

Warning: All libraries taller than 14U must be installed in a rack

having a main protective earthing (grounding) terminal,

and power must be supplied via an industrial plug and

socket-outlet and/or an appliance coupler complying with

IEC 60309 (or an equivalent national standard) and having

a protective earth (ground) conductor with a cross

sectional area of at least 1.5 mm

(14 AWG).

To ensure proper airflow and access space, Allow 60 cm

(24 inches) in the front and back of the library.

1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 569 570

Commentaires sur ces manuels

Pas de commentaire

Quantum Scalar i500 Guide de l'utilisateur Page 346

Commentaires sur ces manuels

Produits connexes et manuels pour Non Quantum Scalar i500