Quantum Scalar i500 Guide de l'utilisateur télécharger pdf (Page 437)

100

101

Chapter 12 Installing, Removing, and Replacing

Installing the Library in a Rack

Scalar i500 User’s Guide 418

Preparing for

Installation 12

Required tools: None

1 Before beginning installation, verify the contents of the rackmount kit

(see Table 9

) and the rack ear kit (see Table 10).

• You only need one rackmount kit per library. The rackmount kit

allows you to secure the bottom module in the rack. It includes

rack ears for additional security.

• You need one rack ear kit for each additional module. Each rack

ear kit contains the supplies to install right and left rack ears on

one module.

• You must install one set of rack ears for each module in the rack.

Table 9 Rackmount Kit

Contents

Warning: Without tape drives, tape cartridges, or power supplies, a

control module weighs approximately 60 lbs (27.2 kg). An

expansion module, without tape drives, tape cartridges, or

power supplies, exceeds 65 lbs (29.5 kg).

To avoid serious injury, at least two people are required to

safely lift the modules.

Note: The rackmount kit cannot be used with every type of rack.

Racks with threaded rails or unique hole spacing, for example,

may not support the rackmount kit. In addition, the rack must

have rail spacing (front to rear) of between 605 mm (23.8 in.)

and 770 mm (30.3 in.).

Component Description Quantity

Small ferrule — Used in

racks with round holes

10 (8

required;

2 spares)

1 2 ... 432 433 434 435 436 437 438 439 440 441 442 ... 569 570

Commentaires sur ces manuels

Pas de commentaire

Quantum Scalar i500 Guide de l'utilisateur Page 437

Commentaires sur ces manuels

Produits connexes et manuels pour Non Quantum Scalar i500