Quantum Scalar i500 Guide de l'utilisateur télécharger pdf (Page 447)

100

101

Chapter 12 Installing, Removing, and Replacing

Installing the Library in a Rack

Scalar i500 User’s Guide 428

1 Place the desired module (whichever module you want to be the

bottom module of the library) onto the rack-mount shelves. From the

front of the rack, lift the module onto the shelf and gently slide it into

the rack. Slide the module to the back of the rack, so that the front of

the module is flush with the mounting holes.

2 From the back of the rack, secure the module to the rack-mount

shelves by tightening the two silver thumbscrews that are attached to

the rear of the rack-mount shelves.

3 Install the right rack ear. At the front of the library:

a Open the I/E station door. At the lower right corner of the

module is a vertical slot. Insert the hinge of the right rack ear into

the slot and then position the holes of the rack ear flush with the

rack rail.

b Using two M5 thumbscrews, fasten the rack ear to the rack. The

thumbscrews should thread through the holes in the rack shelves

and fasten completely and evenly.

1 Hinge of rack ears

1 2 ... 442 443 444 445 446 447 448 449 450 451 452 ... 569 570

Commentaires sur ces manuels

Pas de commentaire

Quantum Scalar i500 Guide de l'utilisateur Page 447

Commentaires sur ces manuels

Produits connexes et manuels pour Non Quantum Scalar i500