Quantum Scalar i2000 Guide de l'utilisateur Page 160

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 544
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 159
Chapter 4 Configuring Your Library
Setting Up the Network Configuration
Scalar i6000 User’s Guide 147
1 Use the following table to assist you in completing the elements on
the IPv4 Network Configuration dialog box.
The Cycle button enables you to cycle the external Ethernet interface
without rebooting the library.
Element Description
In the Host Settings area:
DHCP If Dynamic Host Configuration Protocol (DHCP) is
enabled on your network, select Enable to have
DHCP automatically configure the library network
settings. Enable makes the IP Address, Subnet
Mask, and Default Gateway text boxes
unavailable. Select Disable to make the IP
Address, Subnet Mask, and Default Gateway text
boxes available for you to manually set the library
network settings.
Library Name The network name that you want to assign to the
library.
IP Address The IP address of the library. This text box is
available only if DHCP is disabled.
Subnet Mask The subnet mask. This text box is available only if
DHCP is disabled.
Default
Gateway
The IP address of the default gateway for your
portion of the Ethernet network. This text box is
available only if DHCP is disabled.
In the Port Settings area:
Auto Negotiate Select Enable to have the library automatically
negotiate port speeds. Enable makes the Speed
options unavailable. Select Disable to make the
Speed options available for you to manually set the
port speed.
Speed The port speed (10 Mbps or 100 Mbps). Speed
options are available only if Auto Negotiate is
disabled.
Vue de la page 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 543 544

Commentaires sur ces manuels

Pas de commentaire