Quantum Scalar i2000 Guide de l'utilisateur Page 165

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 544
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 164
Chapter 4 Configuring Your Library
Managing Connectivity
Scalar i6000 User’s Guide 152
For an FC port on either the MCB or an I/O blade, the Fibre Channel
Parameters dialog box appears.
You can configure two settings for an MCB connection and all
settings for an I/O blade connection. The figure above shows an FC
port configured for target mode and a loop preferred connection.
a In the Loop ID area of the Fibre Channel Parameters dialog box,
repeatedly selecting Soft acts as a toggle, checking and clearing
the box. If the box is not checked, you can click a hard loop ID
(within the range from 0 to 125) from the drop-down list. Some
operating systems require hard ID settings. Consult your service
representative before making changes to this setting.
b Select Auto to automatically set the interface speed. To configure
the speed manually, clear the Auto check box and use a setting
from the drop-down list. Because this setting is not configurable
Vue de la page 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 543 544

Commentaires sur ces manuels

Pas de commentaire