Quantum Scalar i2000 Guide de l'utilisateur Page 98

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 544
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 97
Chapter 3 Troubleshooting Your Library
Interpreting LEDs
Scalar i6000 User’s Guide 85
Table 7 Explanations of Blade
Status LED States
LED Color Represents Possible States and Explanations
Green Processor status Solid off — blade’s main processor is not operating (or
blad
e is booting)
Solid on — blade’s main processor is not operating
(however
, this does not apply to the LMD; solid on
indicates that the LMD’s main processor is operating
normally)
Blinks one time every second (1 Hz) — blade’s main
pr
ocessor is operating normally
Blinks 10 times every second (10 Hz) — identify mode
Solid on for three seconds, then blinks twice at 1 Hz, and
then
repeats — blade firmware is downloading
Amber Health status Solid off — blade’s power and control subsystem is
ope
rating normally
Solid on — blade’s power and control subsyste
m has failed
Solid on also can mean that the blade’s power and control
su
bsystem firmware is autoleveling. In conjunction with
the blue amber LED blinking one time every 10 seconds,
this is a normal condition. Autoleveling takes about three
minutes for each blade, and blades within an I/O
management unit autolevel in series. It can take as long as
three minutes for the power and control subsystem to
download. Never remove a blade when the amber LED is
solid on unless it has been on continuously for at least 10
minutes.
Blue Power control status Solid off — blade is not receiving power
Solid on — blade is powered down; ready to be replaced
(s
wap mode)
Blinks one time every 10 second
s (flash) — blade is
powered on; operating normally
Vue de la page 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 543 544

Commentaires sur ces manuels

Pas de commentaire