Quantum Scalar 24 Spécifications télécharger pdf (Page 101)

Scalar 24 Installation and Operation Guide 93

Command Menu

The Command Menu provides access to commands that cause motion within the Scalar 24. From the

Command menu, you can:

• Import media

• Export media

• Dismount drives

• Move media

• Bulk Load media

• Bulk Unload media

• Set Sequential mode options

Figure 3 Command Menu

Import Media

Import allows you to move a data or cleaning tape cartridge from the I/E slot to a storage location in your

library. This allows you to insert a tape into the library without opening the front door. If your I/E slot is

configured as a storage slot, this function cannot be used.

There are two import options: Import Data Cartridge and Import Cleaning Cartridge. To import a cleaning

cartridge, you must first configure a cleaning slot location. For more information on configuring cleaning

slots, see Configure Cleaning Slots

on page 73. There are two methods for importing a data cartridge: with

a partitioned library and with an unpartitioned library.

CAUTION: When a tape is inserted into the I/E slot, the picker may grab the tape to scan it and then

place the tape back into the I/E slot or another slot in the library. This process can take up to 11 seconds,

and during that time you should not insert another tape into the I/E slot.

2 A warning screen will prompt you to

ensure that you want to reset the library

configuration. Press to continue.

The library will reboot and will be set to the

default configuration.

The Setup Wizard will also start to allow a new

configuration to be established.

Selection Description/Result

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 101