Quantum Scalar 24 Spécifications télécharger pdf (Page 22)

14 Description

Media Protection

The write-protect switch is used to prevent recording over existing data. To prevent recording or deleting,

place the write-protect switch to the closed position. The drive senses the position of the switch and will not

allow writing in this position. When inserting cartridges in the Scalar 24, place the switch in the open position,

unless you do not wish to record on a specific cartridge.

The following diagram provides a representational view of media storage as it is laid out in a library

configured for LTO media.

DLT IV

80 GB 12 MB/s

a. 2:1 compression rate.

b. LTO-1 media can be used in LTO-2 drives; however, the capacity and

transfer rates will be at LTO-1 levels. LTO-2 media cannot be used in

LTO-1 drives.

c. DLT IV media can be used in the SDLT320 drive as read only.

Note

Store data cartridges in a dry, cool environment.

CAUTION

Never reset or power down your computer or Scalar 24 while a

function is in process or a tape is moving.

Table 2 Supported Media Types

Media Type Capacity

Transfer Rate

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 22