Quantum Scalar 24 Spécifications télécharger pdf (Page 32)

24 Getting Started

4 Re-install the magazines into the Scalar 24.

5 Close the media access door.

Refer to Bulk Load

on page 103 for instructions on loading cartridges from the magazines into the rear slots.

You can also use your host application to move the cartridges from the magazines to the rear slots. Refer

to Move Media

on page 100 for instructions on loading cartridges into the drive.

Setting up your Scalar 24

After you have set up your host computer, you need to configure your library. Your Scalar 24 provides you

with the unique ability to set up the library using a Setup Wizard. The Setup Wizard guides you step-by-

step through the setup process ensuring that all elements are configured in the proper order.

Your library is shipped with a default configuration that you can use. The default settings are as follows:

Note

Media barcode labels can be viewed through the magazine window.

Note

You will need to push firmly to fully insert the magazines.

CAUTION

Before power up, the library should be free of any obstruction.

Ensure that all tapes are fully inserted into the storage slots and do

not extend out of drives.

Option: Setting: Description:

I/E Slot Import/Export The host will see one import/export

slot and 23 data slots for LTO or 20

data slots for SDLT.

Partitioning Disabled The host will see the entire library.

AutoClean Disabled The library will not clean the drives

automatically when cleaning is

required.

SCSI Mode Random The host will have access to any

tape cartridge randomly. Most host

software use this mode.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 32