Quantum Scalar 24 Spécifications télécharger pdf (Page 48)

40 Frequently Asked Questions

An SDLT cleaning cartridge can be used approximately 20 times. For more information on cleaning the

drive, see Clean Drive

on page 119.

Where is the Serial Number located?

The serial number for your Scalar 24 can be found by using the operator panel. For instructions, refer to

Display Serial Number

on page 117. The serial number can also be found on the inside of your Scalar 24

below the right magazine. You will need to remove the magazine to view the label.

Use the serial number when contacting ATAC for assistance.

What is partitioning?

Partitioning is the way to allow your single Scalar 24 library to be logically partitioned so it will appear to a

host as if it were two independent physical libraries. Each logical library (partition) can be independently

controlled as though it were a separate library.

The Scalar 24 allows you the flexibility to change the partition size, share the I/E slot, as well as share

cleaning tapes between partitions.

The following table lists the partitioning operating modes that can be used with various drive types.

Table 1 Partition Operating Modes

Partition LTO-1/LTO-2 SDLT320

Unpartitioned • Random

• Sequential

•LUN

• Random

• Sequential

Partition 1-Partition 2 • Random-Sequential

• Sequential-Sequential

• LUN-LUN

• LUN-Sequential

• Sequential-LUN

• Random-Sequential

• Sequential-Sequential

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 48