Quantum Scalar 24 Spécifications télécharger pdf (Page 75)

Scalar 24 Installation and Operation Guide 67

6 Press and to enable/disable

AutoClean. If you do not enable

AutoClean, skip to Step 12

.

Available options are:

• on: The library will automatically clean the

drives when cleaning is required. Overall

slots available for data cartridges will be

reduced. Host software cleaning features

MUST be turned off.

• off: AutoClean is disabled

Recommended: off

If you want to use AutoCleaning, configure it

using the Config Slots submenu. For more

information, see Configure Slots

on page 73.

If you enable AutoCleaning through the Setup

Wizard, you will need to set the items shown in

Step 7

through Step 11.

7 Press and then to accept the

changes and move to the next option.

8 Press and to select the mode for

AutoClean.

Available options are:

• Both: Cleans both partitions

• Part 1: Only cleans Partition 1

• Part 2: Only cleans Partition 2

9 Press and then to accept the

changes and move to the next option.

10 Press and to select the number of

cleaning slots you would like to configure.

You can allocate up to four slots to be used for

cleaning.

Slots 20 - 23 can be used as cleaning slots for

LTO; slots 17 - 20 for SDLT. For more

information, see Configure Cleaning Slots

on

page 73.

11 Press and then to accept the

changes and move to the next option.

If you did not enable partitioning, skip to

Step 18

.

Selection Description/Result

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 153 154

Commentaires sur ces manuels

Pas de commentaire