Quantum Scalar 24 Spécifications télécharger pdf (Page 134)

126 Using the Menus

Position Picker

Position Picker allows you to move the picker inside the library to a specified location. If you need to

remove a tape manually from the picker, you can position the picker to point to a slot in a magazine near

the front door. If you need to remove a tape manually from the rear slots or drives, you can move the picker

away from the slot you need to access.

5 Press and to select/deselect the

Drives slot.

Available options are:

• yes: allows loads and unloads to the drives

• no: does not load or unload tapes to the

drives

6 Press to move to the next option.

7 Press and to select the number of

Hours to run the manufacturing test.

You can choose between 0 and 72 hours.

8 Press to highlight Execute ( ) and

then press .

The Manufacturing test begins.

9 A status screen will display the progress of

the test. You can press at any time to

cancel the test.

10 When the test is complete, a completion

message is displayed. Press to

dismiss.

Selection Description/Result

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 134