Quantum Scalar 24 Spécifications télécharger pdf (Page 114)

106 Using the Menus

Sequential

Sequential allows you to start, stop, and resume the sequential backup sequence. You can also set

sequential loop mode. If your library is partitioned, you can control each partition independently.

Path:

Start Loop

Start Loop mode allows you to operate in a continuous backup mode. When all tape cartridges have been

filled with data, the Scalar 24 will begin again with the first cartridge, overwriting tape cartridges upon reuse.

4 The bulk load operation begins. The

operation can be cancelled at any time by

pressing .

Bulk unload for Partition 1 - The library will

begin loading the left magazine by selecting

the left most available cartridge in the rear slots

of Partition 1 and placing it in the left most slot

in the left magazine. The bulk unload will

continue until either there are no more tapes in

the rear slots or there are no more available

slots in the magazine.

Note, rear slots identified as Partition 1 can

only be bulk unloaded into Magazine 1, and

rear slots identified as Partition 2 can only be

bulk unloaded into Magazine 2 while

partitioning is enabled.

5 When the bulk load is complete, a

completion screen is displayed. Press

to dismiss the screen.

Selection Description/Result

1 From the Command menu, highlight

and press .

Sets options for sequential backup.

Selection Description/Result

Main Menu

Command Menu

Sequential

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 114