Quantum Scalar 24 Spécifications télécharger pdf (Page 93)

Scalar 24 Installation and Operation Guide 85

Set Password

Password allows you to enable or disable a password for access to the library. This enables you to prevent

unauthorized personnel from disrupting the operation of the Scalar 24. If you have set a password, it must

be used to view or execute any of the options in the Setup, Command, or Tools menus. If you have set a

timeout value, after the specified number of minutes of inactivity, you will be automatically logged out and

you will have to re-enter your password. By default, there is no password set on your Scalar 24.

Selection Description/Result

1 From the Setup menu, highlight and

press .

Sets timeout window.

2 Highlight and press .

3 Press and to select the value of the

timeout window.

The timeout window is represented in minutes.

You must specify a value between 1 and 9.

The default setting is 9 minutes.

If you have set a password, after the timeout

window has expired, the password will need to

be re-entered to access the library.

4 Press to highlight Execute ( ) and

then press .

5 A confirmation screen displays. Press

to dismiss.

The timeout value is set.

Note

If the password has been enabled by the SCSI host, you cannot modify or

disable the password using the LCD display on the Scalar 24.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 93