Quantum Scalar 24 Spécifications télécharger pdf (Page 82)

74 Using the Menus

Configure Modes

This option allows you to set up your library to run in Random, Sequential, or LUN modes.

4 Press and to select the number of

slots you would like to allocate as cleaning

slots.

You can allocate up to four slots to be used for

cleaning.

Slots 20 - 23 can be used as cleaning slots for

LTO or slots 17 - 20 for SDLT. When a slot is

configured for cleaning, a C appears in that

slot.

NOTE: If partitioning is configured, the

number of rear slots may be limited to allow at

least one slot in Partition 2.

Be sure to remove storage media from a slot

before designating it as a cleaning slot.

5 Press to highlight Execute ( ) and

then press .

6 A confirmation screen displays. Press

to dismiss.

The cleaning slots are now configured.

Random This mode is used when you are connected to host application software that

recognizes a library media changer device. It allows your host application

software to access any tape cartridge randomly and permits you to logically

divide the cartridge usage to satisfy particular storage needs. This is the

default setting and the mode that most host software will use.

If you are connected to a host, ensure you are in Random mode.

Selection Description/Result

configured as a

cleaning slot

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 153 154

Pas de commentaire

Quantum Scalar 24 Spécifications Page 82